HP 205 G1, Руководство по обслуживанию и ремонту

Страница: 112 / 128

Table 10-1 Numeric Codes and Text Messages (continued)
Control panel message Description Recommended action
contact an authorized dealer or reseller for RTC
battery replacement.
163-Time & Date Not Set CMOS jumper may not be properly installed. Check for proper placement of the CMOS jumper
if applicable.
164-MemorySize Error Memory amount has changed since the last
boot (memory added or removed). Press the F1 key to save the memory changes.
164-MemorySize Error Memory configuration incorrect. 1. Run Computer Setup or Windows utilities.
2. Make sure the memory module(s) are
installed properly.
3. If third-party memory has been added,
test using HP-only memory.
4. Verify proper memory module type.
201-Memory Error RAM failure. 1. Ensure memory modules are correctly
installed.
2. Verify proper memory module type.
3. Remove and replace the identified faulty
memory module(s).
4. If the error persists after replacing
memory modules, replace the system
board.
213-Incompatible Memory Module in Memory
Socket(s) X, X, ... A memory module in memory socket identified
in the error message is missing critical SPD
information, or is incompatible with the chipset.
1. Verify proper memory module type.
2. Try another memory socket.
3. Replace SODIMM with a module
conforming to the SPD standard.
214-SODIMM Configuration Warning Populated SODIMM Configuration is not
optimized. Populate the SODIMMs so that each channel has
the same amount of memory.
219-ECC Memory Module Detected ECC Modules
not supported on this Platform Recently added memory module(s) support ECC
memory error correction. 1. If additional memory was recently added,
remove it to see if the problem remains.
2. Check product documentation for
memory support information.
301-Keyboard Error Keyboard failure. 1. Reconnect keyboard with computer
turned off.
2. Check connector for bent or missing pins.
3. Ensure that none of the keys are
depressed.
4. Replace keyboard.
303-Keyboard Controller Error I/O board keyboard controller. 1. Reconnect keyboard with computer
turned off.
2. Replace the system board.
304-Keyboard or System Unit Error Keyboard failure. 1. Reconnect the keyboard with computer
turned off.
2. Ensure that none of the keys are
depressed.
104 Chapter 10 POST Error Messages