HP 2/8q Fibre Channel Скачать руководство пользователя страница 10

Страница: 10 / 70

About this Guide

HP StorageWorks 2/8q Fibre Channel Switch Installation Guide

Rack stability

Rack stability protects personnel and equipment.

WARNING:

To reduce the risk of personal injury or damage to the equipment, be sure

that:

■

The leveling jacks are extended to the floor.

■

The full weight of the rack rests on the leveling jacks.

■

In single rack installations, the stabilizing feet are attached to the rack.

■

In multiple rack installations, the racks are coupled.

■

Only one rack component is extended at any time. A rack may become unstable if

more than one rack component is extended for any reason.

Getting help

If you still have a question after reading this guide, contact an HP Authorized Service Provider
or access our web site:

http://www.hp.com

Note:

HP call centers use product and serial numbers to validate warranty entitlement. Most HP

products can provide product number, serial number and firmware revision electronically through

the use of supplied management or diagnostic utilities, eliminating the need to physically inspect or

remove products from installed enclosures. You may be directed by HP to run these utilities to

gather required entitlement information.

HP installation and configuration assistance

A moderate level of SAN-related knowledge is required to successfully install this product. If
you are not familiar with installing and configuring storage array systems in a SAN, HP can
install it for you.

For more information, access our web site at

http://www.hp.com/hps/storage/ns_implementation.html

Depending on your needs, different levels of assistance are available.

For example, the HP Installation and Startup for HP StorageWorks Disk Arrays Service
Package includes:

■

Physical installation of the MSA

■

Virtual disk design and configuration of the MSA

■

Service planning

■

Service deployment

■

Installation Verification Testing (IVT)

■

Customer orientation

Содержание 2/8q Fibre Channel







































































Результаты поиска

Содержание 2/8q Fibre Channel

Отзывы:

Похожие инструкции для 2/8q Fibre Channel

Бренды по названию

Популярные бренды

HP 2/8q Fibre Channel, Руководство по установке

Результаты поиска

Содержание 2/8q Fibre Channel

Отзывы:

Похожие инструкции для 2/8q Fibre Channel

Бренды по названию

Популярные бренды