manualshive.com logo in svg

HP 1820, Руководство по управлению и настройке

Поделиться
Скачать
HP 1820 Скачать руководство пользователя страница 64

7-6

Link Layer Discovery Protocol (LLDP and LLDP-MED)

LLDP Remote Device Summary

LLDP Remote Device Summary

Use the LLDP Remote Device Summary page to view information about remote devices for which the switch 
has received LLDP information. Interfaces that have this option enabled display in this table only if they have 
received LLDP notifications from a remote device.

To display the Remote Device page, click 

LLDP

 > 

Remote Devices 

in the navigation pane.

Figure 7-4. LLDP Remote Device Summary Page

Table 7-5. LLDP Remote Device Summary Fields

Field

Description

Interface

The HP 1820 interface that received the LLDP data from the remote system.

Remote ID

The identifier assigned to the remote system that sent the LLDPDU.

Chassis ID

The hardware platform ID for the remote system.

Port ID

The physical address of the port on the remote device that sent the LLDP data.

Port Description

The port description configured on the remote device. If the port description is not 

configured, the field is blank.

System Name

The system description configured on the remote device. If the system description is not 
configured, the field is blank.

Capabilities Supported

The capabilities on the remote device. The possible capabilities include other, repeater, 
bridge, WLAN AP, router, telephone, DOCSIS cable device, and station.

Capabilities Enabled

The capabilities on the remote device that are enabled. 

System IP

The reported management IP addresses of the remote device. The system IP address 
provides a link to the web interface on the remote device.

Содержание 1820















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды