manualshive.com logo in svg

HP 175X - JetDirect Print Server, Руководство администратора

Поделиться
Скачать
HP 175X - JetDirect Print Server Скачать руководство пользователя страница 60

ENWW

TCP/IP Configuration 60

trap-dest:

Enters a host’s IP address into the HP Jetdirect print server’s SNMP trap 
destination list. The command format is:

trap-dest: 

ip-address [community name] [port number]

The default community name is ”public”; the default SNMP port number is ”162”. 
The port number cannot be specified without a community name.

If a ”trap-community-name” command is followed by ”trap-dest” commands, the 
trap community name will be assigned to those entries unless a different 
community name is specified in each ”trap-dest” command.

To delete the table, use ”trap-dest: 0”.

If the list is empty, the print server does not send SNMP traps. The list may contain 
up to three entries. The default SNMP Trap Destination List is empty. To receive 
SNMP traps, the systems listed on the SNMP trap destination list must have a trap 
daemon to listen to those traps.

IPX/SPX

ipx-config:

Enables or disables IPX/SPX protocol operation on the print server: 0 disables, 
1 (default) enables.

ipx-unit-name:

A user-assigned alphanumeric name assigned to the print server (31 characters 
maximum). By default, the name will be NPIxxxxxx, where xxxxxx are the last six 
digits of the LAN hardware address.

ipx-frametype:

Specify the IPX frame type setting available for your print server model: AUTO 
(default), EN_SNAP, EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP.

ipx-sapinterval:

Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server 
waits between Service Advertising Protocol (SAP) broadcasts on the network. The 
default is 60 seconds. 0 disables SAP broadcasts. 

ipx-nds-tree:

Identifies the name of the Novell Directory Services (NDS) tree for this printer.

ipx-nds-context:

An alphanumeric string, up to 256 characters, that specifies the NDS context for 
the HP Jetdirect print server. 

ipx-job-poll:

Specifies the time interval (seconds) that the HP Jetdirect print server will wait to 
check for print jobs in a print queue.

Table 3.3

TFTP Configuration File Parameters (7 of 10)

Содержание 175X - JetDirect Print Server















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды