manualshive.com logo in svg

HP 17 Laptop PC, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 17 Laptop PC Скачать руководство пользователя страница 66

Heat sink assembly

NOTE:

The heat sink assembly spare part kit includes replacement thermal materials.

Description

Spare part number

Heat sink assembly for use in models with Intel Pentium or Celeron processors and discrete graphics

926525-001

Heat sink assembly for use in models with Intel Core processors and discrete graphics

926523-001

Heat sink assembly for use in models with a fan and with Intel Core processors and UMA graphics

926522-001

Heat sink assembly for use in models without a fan and with Intel Pentium or Celeron processors and UMA 
graphics

926524-001

NOTE:

To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the 

computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and 
is designed to turn on automatically when high temperature conditions exist. These conditions are affected by 
high external temperatures, system power consumption, power management/battery conservation 
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the 
ventilation grill located on the left side of the computer.

Before removing the heat sink assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 32

).

5.

Remove the optical drive (see 

Optical drive on page 33

).

6.

Remove the bottom cover (see 

Bottom cover on page 41

).

To remove the heat sink assembly:

1.

If you have a model with discrete graphics:

a.

In the order indicated on the heat sink, loosen the seven Phillips screws (1) that secure the heat 
sink to the system board.

58

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание 17 Laptop PC















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды