manualshive.com logo in svg

HP 15-fb0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 55 / 89

Поделиться
Скачать
HP 15-fb0 Series Скачать руководство пользователя страница 55

4.

Remove the card reader (5).

To install the card reader, reverse this procedure.

Heat sink

To remove the heat sink, use these procedures and illustrations.

Table 6-9

Heat sink descriptions and part numbers

Description

Spare part number

Heat sink for use in models with RTX 3050 or 3050Ti

N13305-001

Heat sink for use in models with GTX 1650 graphics

N13306-001

Heat sink for use in models with RX 6500M graphics

N14593-001

Before removing the heat sink, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 36

).

2.

Remove the bottom cover (see 

Bottom cover on page 36

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 38

).

Remove the heat sink:

1.

Remove the Phillips M2.0 × 2.0 screw (1) from the plastic holder at the top of the computer, and then 

remove the holder (2).

2.

In the order indicated on the heat sink, loosen the seven captive Phillips screws (3) that secure the heat 

sink to the system board.

Heat sink

49

Содержание 15-fb0 Series


























































































Отзывы:

Нет отзывов