manualshive.com logo in svg

HP 15-fb0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 50 / 89

Поделиться
Скачать
HP 15-fb0 Series Скачать руководство пользователя страница 50

4.

If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on 

the antenna connector, as shown in the following illustration.

To install the WLAN module, reverse this procedure.

Speakers

To remove the speakers, use this procedure and illustration.

Table 6-4

Speaker description and part number

Description

Spare part number

Speaker Kit

N13315-001

Before removing the speakers, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 36

).

2.

Remove the bottom cover (see 

Bottom cover on page 36

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 38

).

Remove the speakers:

1.

Remove the two Phillips M2.0 × 2.0 broadhead screws (1) that secure each speaker to the computer.

2.

Disconnect the speaker cables from the system board (2).

3.

Remove the speakers from the computer (3) .

NOTE:

When removing the speakers, make note of the location of the rubber isolators. The absence of 

or damage to these isolators can result in degraded speaker performance.

44

Chapter 6  Removal and replacement procedures for authorized service provider parts

Содержание 15-fb0 Series


























































































Отзывы:

Нет отзывов