manualshive.com logo in svg

HP 11 G4 EE, Руководство по техническому обслуживанию и ремонту, Страница: 31 / 64

Поделиться
Скачать
HP 11 G4 EE Скачать руководство пользователя страница 31

Description

Spare part number

Description

Spare part number

For use in Belgium

822639-A41

For use in the Netherlands

822639-B31

For use in Canada

822639-DB1

For use in Russia

822639-251

For use in Denmark, Finland, 
and Norway

822639-DH1

For use in Spain

822639-071

For use in France

822639-051

For use in Switzerland

822639-BG1

For use in Germany

822639-041

For use in the United Kingdom

822639-031

For use in Italy

822639-061

For use in the United States

822639-001

In anodized silver finish for use only on HP Chromebook 
computer models not equipped with WWAN capability:

NOTE:

Keyboard/top cover spare part kits with spare part 

numbers 783090-xxx are only to be used with TouchPad board 
spare part kit 783086-001.

For use in Latin America

783090-161

For use in Belgium

783090-A41

For use in the Netherlands

783090-B31

For use in Canada

783090-DB1

For use in Russia

783090-251

For use in Denmark, Finland, 
and Norway

783090-DH1

For use in Spain

783090-071

For use in France

783090-051

For use in Switzerland

783090-BG1

For use in Germany

783090-041

For use in the United Kingdom

783090-031

For use in Italy

783090-061

For use in the United States

783090-001

Before removing the keyboard/top cover, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the 2 rear computer feet (see 

Computer feet on page 23

).

NOTE:

When replacing the keyboard/top cover, be sure that the heat sink (see 

Heat sink on page 30

) and 

TouchPad (see 

TouchPad board on page 31

) are removed from the defective keyboard/top cover and 

installed on the replacement keyboard/top cover.

Remove the keyboard/top cover:

1.

Remove the two rubber screw covers (1).

The rubber screw covers are included in the Rubber Kit, available using the following spare part 
numbers:

●

851140-001 — For use only on HP Chromebook 11 G4 computer models

●

822632-001 — For use only on HP Chromebook computer models in sky blue finish

●

822633-001 — For use only on HP Chromebook computer models in turbo silver finish

●

822631-001 — For use only on HP Chromebook computer models in smoke silver finish

Component replacement procedures

25

Содержание 11 G4 EE

































































Отзывы:

Нет отзывов