HP Velotechnik GrassHopper fx and Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 84

HP Velotechnik GrassHopper fx and Скачать руководство пользователя страница 12

Safety instructions (bicycle)

12

HP

Velotechnik

Attention!

Mounting additional parts

or accessories is at your own risk. It is
important that you carefully read the in-
stallation guide of the manufacturer. Addi-
tions to the handlebar like fairings, handle-
bar fittings, bottle holders, etc. may impair
your safety due to additional loading or
clips with sharp edges.

Fairings

As a front fairing for recumbent bicycle
Grasshopper fx or Streetmachine, you may
use the Streamer fairing offered by
HP V

ELOTECHNIK

(not available for Speedma-

chine). Please take care to assure a good
vision over the fairing and sufficient freedom
of movement below.

Please take into account that any fairing makes
the bicycle more prone to crosswind influ-
ences. In strong wind or gusts of wind unsafe
situations may occur. Please remove the
fairing before riding in such weather condi-
tions.

Streetmachine Gte with "Streamer" front fairing

Replacement of parts

The replacement of parts relevant for safety
(especially brakes, lighting system, stem, han-
dlebar, knuckles, drive train, suspension ele-
ments) should only be done with original
parts by a bicycle mechanic, since it requires a
certain degree of skill, suitable tools and
mechanical aptitude.

Any technical change you perform on your
own is at your own risk!

Danger!

If any part is deformed (e.g.

due to an accident or overload), especially
frame, knuckles, handlebar, seat mountings,
pedals, cranks and brakes, it is not allowed
to use it any further or repair it. Do not
try to straighten bent parts. You must re-
place them for your own safety. If you do
not replace a damaged part it can result in
a total failure of the part and you may be
seriously injured!

Do not take kids with you

HP V

ELOTECHNIK

bicycles are not designed for

the transport of children. You are not allowed
to mount a child's seat. It is only allowed to
transport children in a trailer that has been
specially designed for that purpose.

Trailers

You are allowed to use trailers up to 40 kg
(88 lbs). We recommend you to assemble it
with the W

EBER

-coupling Type E. Always

check that the suspension and the trailer still
work properly after having mounted the
trailer. Take care that the trailer does not
damage the frame in case the bicycle falls
over.

For Chariot trailers you can order a coupling
adapter for 20" rear wheels.

Read the manual of the trailer manufactuerer
carefully an check for speed regualtions,
maximum load cpacity as well as regulations
for trailers on publics streets in you country
or state.

In Germany, persons of less than 16 years are
not allowed to tow a trailer manned with
children.

Remember that your bicycle is longer when
carrying a trailer, and riding behaviour is
different due to the additional weight.

«
...
10
11
12
13
14
...
»

Содержание GrassHopper fx and





















































































Отзывы:

Нет отзывов