HOZAN С-426, Инструкция по эксплуатации

Страница: 8 / 8

Relative products
C - 15 CHAIN LUBE ( Uses : Lubrication and rust - proofing for bicycle chain and derailleur)
This lubricant is in thin liquid form when applied, so that it penetrates into the chains, and the
solvent volatilizes in about one minute. The principal component remains at the connecting pin area.
This is the most suitable lubricant for the chain of MTBs exposed to
mud and rain. NET : 110mL
Z - 295 OVERHAUL CLEANER
Flushes adhering oily dirt and grease as well as water - soluble dirt,
easily dissolving very dissimilar substances. Also effective against
complex dirt such as combinations of oils, fats, and mud. Does not
corrode rubber or plastics. No solid residue remains after drying.
A moderately - slow drying cleaning liquid. NET : 500mL
C - 10 BIKE LUBE
(Uses : Lubricating and rust - proofing suspension fork, shifting lever, wires, derailleur, etc.)
The HOZAN C - 10 BIKE LUBE, contains 5
μ
diameter ultra - particled Teflon powder suspended in
high - grade synthetic oil, quickly spreading on applied surfaces. NET : 420mL
C - 13 Li - Ca GREASE ( Uses : Lubricating, rust - proofing and waterproofing for headset, bottom
bracket, shifting lever, wires, derailleur, suspension fork, etc.)
The HOZAN C - 13 Li - Ca GREASE is the best grease for ball bearings which bear heavy loads, such
as the headset and bottom bracket. NET : 190mL
４ ４ ４ ４
13.05
1 - 2 - 12 Saiwaicho, Naniwa - ku, Osaka 556 - 0021, Japan
Tel : 81-6-6567-3113 F a x : 81 - 6 - 6562 - 0024
Regarding the dies
The die provided with the C - 426 and
the C - 427 are as the table.
The die holders of those are identi-
cal, so one die holder corresponds
to each size exchanging the dies
only.
C - 426 - 1 C - 427 - 1
C - 426 C - 427
Provided die
BC1x24 JIS size 1 - 1/8”x26
Part No.
The C - 426 (C - 426 - 1) can not be used for Italian sized fork threads since the angle of actual
threads of which are different from BC1
×
24JIS.