HOZAN HS-603, Инструкция по эксплуатации, Страница: 15 / 20

５
When ordering custom nozzles
Custom nozzle(s) can be made even one piece.
When ordering the sample of component or an accurate drawing is required. We are able
to quote on receipt of sample or dimensions given in above chart. However, if the pitch of
the leads are not even or with very large, or if they have non-symmetrical shape along the
X/Y axis, then an actual component or accurate drawing should be required.
Types of nozzle pipe
inner dia. 1.18mm
φ
outer dia. 1.48mm
φ
inner dia. 0.68mm
φ
outer dia. 0.88mm
φ
inner dia. 1.45mm
φ
outer dia. 1.81mm
φ
inner dia. 1.18mm
φ
outer dia. 1.48mm
φ
Straight Thin BGA (CSP)
Nozzle selection
Various standard nozzles are available for popular chip components.
See the latest HOZAN catalog or web site for further reference.
Refer to the following chart for applicability.
For SOP For QFP For PLCC BGA (CSP)
●
●
: Drilled holes
on the nozzle
base plate
The distance marked
“H” is recommended to
be a little shorter than
actual measure.
The distance is meas-
ured at inside of pipe to
pipe.
The pattern of the lead
marked “ α ” is little, thin
type of pipe is suitable.
The distance is set to
1 . 0 mm larger than the
measure
,
not to touch
the leads
.
The size is recommend-
ed to put in the compo-
nent without room.
Lead
pitch