HOZAN C-702-13, Инструкция по эксплуатации

Страница: 12 / 12

●
Lubricate rollers with cutting oil every work.
●
Clean rollers with a brush when cutting scraps remain in roller grooves.
●
If the roller set nuts become loose, turn them clockwise
with a 5.5 mm open wrench.
●
The die head is a consumable part. Even if it is adjusted with the adjust nut, it
may not be possible to roll the correct thread. In that case please replace the
die head. Rollers alone cannot be replaced.
●
Store the die heads wrapping with the antirust bags (original yellow polyethylene
bags) or after treat with lubricant.
6
Attach the adjusted die head to the main body.
Die head adjustment
Die head maintenance
Replacement die heads
6
Process an actual spoke according to “Operation” (page 2—4) and inspect
fit condition with the nipple.
It is completed if the nipple is inserted smoothly.
If the nipple cannot be inserted, repeat procedures from
2 to 7 until the
correct threads are produced.
7
1-2-12 Saiwaicho, Naniwa-ku, Osaka 556-0021, Japan
Tel : +81-6-6567-3111 Fax : +81-6-6562-0024
19.01
C-707-13 Die head
For stainless steel/steel spokes
C-707-14 Die head
For stainless steel/steel spokes
C-707-15 Die head
For stainless steel/steel spokes
Roller set nut