HOZAN C-440, Операция

Страница: 8 / 8

４ ４ ４ ４
Daily care
● Store this tool with free tension on the chuck, loosing the chuck cover. Otherwise, the chuck will lose
tenacity and shorten the life span of the chuck.
● Lubricate the moving parts periodically.
●
Wipe the oil off on the collar.
The chuck is a consumable part. Ask your HOZAN dealer if necessary.
Troubleshooting
The chuck can not hold the ball race well !!
Check if the collar is right size. It may not be appropriate size for the ball race.
Select the right collar again. Or the chuck cover may not be tightened enough, or the handle may be
turned too fast.
If it is possible to remove a ball race installed on longer fork than 210mm.
It is applicable to even longer fork than 210mm in combination with the C - 441, EXTENSION TUBE.
What is availability of replacement parts ?
Consumables and some of component parts are available. Ask your HOZAN dealer.
Is this tool applicable to rigid fork ?
Generally, the size of ball race installed on a rigid fork is rather small for C - 440 ( even with smallest
collar ) and there could be a little rattle between the ball race and the chuck.
But it could not be a problem as long as the chuck hold the ball race evenly and turn the chuck cover
slowly.
Q1
A1
Q2
A2
Q3
A3
Q4
A4
C - 441, EXTENTION TUBE
Combination with C-440, it could be applicable to any length of fork even with multiple use of C-441.
Optional parts
1 - 2 - 12 Saiwaicho, Naniwa - ku, Osaka 556 - 0021, Japan
Tel : 81-6-6567-3111 F a x : 81 - 6 - 6562 - 0024
16.02