７
７
７
７
Operation
Set this tool under the area where stiff-
ness exists.
Turn the handle clockwise to apply the
tip of the needle to the center of the
connecting pin end. (Fig.12)
Turn the handle clockwise between 1/4
to 1/2 rotation more after the needle
touches to the connecting pin.
Turn the handle counterclockwise to
reverse the needle, then remove this
tool from the chain.
Observe the chain’s movement.
Continue adjusting as necessary until
the chain runs smoothly.
●
●
●
●
Releasing stiffness
The chain after connecting work can not run smoothly since the link plates are in condi-
tion of being pressed each other in the area where the connecting pin is inserted. There-
fore this procedure is necessary according to types of chains.
４
４
４
４
５
５
５
５
１
１
１
１
２
２
２
２
３
３
３
３
Do not work connecting or cutting chains using the stiffness release guide. If you do,
this tool may break.
Caution
Fig.12
NOTE: It is not necessary to release stiffness with almost all narrow chains
(chains for outer type multiple speed derailleur).
Stiffness release guide
Guide
