Hoymiles MI-500, Руководство пользователя

Страница: 13 / 23

© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved. 13
MI-500/MI-600/MI-700
5.5 Installation Steps
Step 1. Install Microinverter
A. Mark the approximate center of each panel on the frame.
B. Install the Microinverter shown as below. The silver cover side should be up.
C. Tighten the screw and fix the inverter on the frame .
Observe the certification documents concerning the maximum number of Micro-inverters
permitted for installation at each cable section!
The Microinverter must be under the module, out of long-term exposure to direct sunlight or
rain.
Step 2. Connect AC Cables of Microinverter
A.
Plug the AC connector of the first microinverter into the connector of the second microinverter,
and so for the rest, to form a continuous AC branch circuit
B.
Install the AC End Cap on the open AC connector of the last microinverter in the AC branch circuit.