hoxter ECKA 35 Скачать руководство пользователя страница 7

7

1.6. 

FirE iN ThE ChimNEy

When burning wood, sparks from the fireplace may get into  the chimney and ignite the built up 
layer of soot. Therefore, the fireplace insert, smoke flue and the chimney must be regularly cleaned. 
If starting the heating after a long break in operation, then first check that the system is not blocked 
anywhere.

A fire in the chimney is indicated by flames coming from the mouth of the chimney with sparking 
and smoke and with a smell from the fireplace. In this case:

-  

 Call the fire brigade!

-   Close the air supply of the fireplace insert.
-   Remove all flammable items from nearby the chimney.
-    Before the arrival of the fire brigade, do not try to extinguish the fire in the chimney with water. 

In the case of a chimney fire, the temperature can reach up to 1,300 °C. In this case, the water 
will immediately turn into a huge quantity of steam and destroy the chimney.

-   After the fire is gone, contact a chimney sweep who can assess the condition of the chimney.

1.7. 

SuPPly OF COmbuSTiON air

The fireplace insert is technically adapted for the combustion of air supplied from the exterior. 
If during assembly the fireplace insert was not connected to this external air supply, it is necessary 
to ensure a sufficient quantity of combustion air in the room by ventilation. Do not use the fireplace 
insert together with other heating equipment or a consumer appliance that may create under-
pressure in a closed room. Components for controlling the air supply into the fireplace insert must 
not be modified.

1.8. 

uNauThOrizED TEChNiCal mODiFiCaTiONS

It is forbidden to interfere with the construction of fireplace insert. If any unauthorized technical 
modifications are made, the manufacturer will not bear any liability for safety during the operation 
of equipment and the warranty will be automatically invalidated. Only spare parts approved by 
the manufacturer must be used.

2.  FuEl

2.1. 

FOrbiDDEN FuEl

In the fireplace insert it is forbidden to burn any other fuel than that designated for its purpose. 
It is also forbidden to burn liquid fuel and waste. Under no circumstances should petrol, alcohol, 
solvents, etc, be used for ignition! The use of any other fuel than that permitted will damage 
the fireplace insert and load the environment and will also automatically invalidate the warranty.

Содержание ECKA 35





















Отзывы: