hoxter ECKA 35, Руководство пользователя, Страница: 15 / 20

15
5.1. ClEaNiNG ThE GlaSS
The door of the Hoxter fireplace insert is produced from high-quality ceramic glass and is fitted with
a self-cleaning ceramic glass system. Air supplied into the combustion chamber “rinses” the glass
from the inside. Correct regulation of air and by burning dry wood will result in clear glass that won’t
need to be cleaned very often. To clean dirty glass in the fireplace insert with the liftdoor, first open
all the handles along the perimeter
(Fig. 10a)
. Then open the door into the cleaning position
(Fig. 10b)
.
FiG. 10a
FiG. 10b
Only clean the glass with a wet paper cloth. If this is insufficient, apply a small amount of clean ash
from the burning chamber of the fireplace insert. Then wash the glass again with a wet paper cloth
and polish with a dry cloth.
Do not use in any circumstances any aggressive cleaning detergents! These can damage
the components in the door of the fireplace insert (sealing, polished areas, stainless bars, imprinting
of glass, etc.).
5.2. rEmOviNG aSh
Notice: Ash can contain hot coal for up to 24 hours.
Always remove the ash when it is cold and extinguish the fireplace insert! Then place them for
24 hours into a non-flammable vessel out of the reach of children. Your Hoxter fireplace insert
uses the latest and the most effective grid-free method of burning. Remove the ash within regular
intervals adapted to the intensity of the heating. When cleaning, leave a small quantity of ash
to speed up the ignition.