hoxter ABRA 6, Инструкция по установке и эксплуатации, Страница: 13 / 16

HOXTER
1.01 HAKA 37/50
1.02 HAKA 63/51
1.03 HAKA 67/51h
1.04 HAKA 89/45h
1.05 ECKA 67/45/51h
1.06 ECKA 90/40/40h
1.07 HAKA 37/50W
1.08 HAKA 63/51W
1.09 HAKA 63/51WT
1.10 HAKA 67/38W
1.11 HAKA 67/51W
1.12 HAKA 89/45Wh
1.13 ECKA 67/45/51Wh
UNIVERSAL
2.01 UNI - 80°C
2.02 UNI - 250°C
2.03 UNI - 400°C
Failure Cause Solution
Control diode RUN
doesn’t flash.
Electronical fireburning
control unit is in set-up
mode.
Remove and put back
batteries from the
display. Finish the set-up
process.
Sig is showing on the
display, control diode
PWR is off.
Electronical fireburning
control unit is not feeded
from the power supply
feed.
Check the connection
between electronical
fireburning control unit
and the power supply
feed.
Display is showing SiG,
control diode PWR is
on, control diode RUN is
not flashing.
Electronical fireburning
control unit is in set-up
mode.
Remove and put back
batteries from the
display. Finish the set-up
process.
Display is showing SIG,
control diode PWR
is on, control diode
RUN is flashing.
Display is out of reach
from the electronical
fireburning control unit.
Put the display closer
to the electronical
fireburning control unit.
Display and electronical
fireburning control unit
are not on the same
channel.
Repeat the whole proces
described in chapter
„Setting up the product
and communicating
channel“.
The communication
between display and
electronical unit is
interfered.
Repeat the whole proces
described in chapter „
Setting up the product
and communicating
channel“. Change the
communication channel
as described in point
7 of this chapter.
LIST OF PRODUCTS
13