RH Side
Panel x1
Screw x4
(4x16mm)
HYH1323
Fit the RH side panel to the shelf racks aligning the
holes in the side with the rack and handle bar.
Secure rack in 4 positions with screws.
3
7
Fit the pull down shelving assembly into the cabinet,
locating the tops of the mechanism into the plate
holding slots on the sides.
Adjust the weight lever on the side of the basket depending on the load (see below).
Note: Weight selector lever should be set to maximum for installation. Only adjust when shelving is stored away.
8
Unit Operation and Adjustment
Fit the connection bar to the mechanisms.
Note:
Fully tighten once basket has
been fitted in the next stage.
LH Side
Assembly
Right Side
Fixing Plate x1
Connection
Bar x1
Bolt x4
(M5x10mm)
Set to light
Set to heavy
Note:
Make sure the plate is located
into the slot. Push together to ensure
the bolt locates into the holes.
Slots
Bolt x4
(M4x8mm)
Screw x4
(4x16mm)
Screw x4
(M5x8mm)
HEAVY
LIGHT
LIGHT - 0-5kgs
HEAVY - 4-9kgs
344mm
128mm
55mm
130mm
205mm
230mm
120mm
Screw x6
(4x14mm)
431mm
128mm
55mm
140mm
225mm
248mm
160mm
RH Side
RH Side
5
Fit the fixing plates to each side of the cabinet
aligning the brackets with the spiked hole
positions.
CAUTION: Care must be taken when
handling the brackets. Moving parts
can lead to finger entrapment if
care is not taken
LH Side
Left Side
Fixing Plate x1
RH Side
6
Fit the LH & RH brackets to the fixing plates, slotting them into position.
Secure the brackets to the cabinet and fixing plates using the screws and bolts
as show.
LH Side
Washer x4
Spring Washer x4
4
Mark and spike the cabinet side
panels for the fixing plates.
Washer x4
