32E Series – Endless Design
Curved Glass – Single Duty – Deli
Standard Specifications and Optional Features
OPTIONAL FEATURES
A Division of HMC Enterprises LLC •
2501 Grant Avenue • Philadelphia, PA 19114 USA
(215) 464-6800 • 1-800-344-8222 • Fax (215) 969-4890 • E-Mail: [email protected] • www.howardmccray.com
UL Classified to ANSI/NSF 7
Foamed in place CFC free foam
Double pane coated and insulated curved glass
Heavy gauge steel super structure
Single duty display
Endless design allows for continuous line up
Drain is included for cleaning
Satin finish extrusion on doors and door tracks
Designer white exterior front and ends
Stainless steel mirror trim
Stainless steel heavy gauge top – 16" W
Rear of unit is stainless steel brush finish at top
Bottom rear is designer white aluminum
CONSTRUCTION
FINISHES
INTERIOR
REFRIGERATION
EXTERIOR
LIGHTING
ELECTRICAL REQUIREMENTS
Stainless steel mirrored upper ends
Stainless steel heavy gauge lighted mezzanine shelf
(1row
)
Anodized aluminum floor-main deck area
Epoxy coated main deck shelves
Air insulated baffle
(prevents moisture from drip-
ping into display area)
Copevap system
(eliminates need for
condensate pan)
R134a expansion valve system
Gravity coil located at inside top of unit
Self contained system
Automatic defrost controlled by time clock-
(self
contained units only)
Pressure control maintains constant temperatures
Remotes available
Double pane rear removable doors
Newly designed rear compression door jamb
Removable front grille allows for cleaning
Removable rear grille for easy servicing
1" removable end panels
1 Row of T12 lighting at top of unit
1 Row of lighting on mezzanine shelf
115V/60Hz/1Ph
Unit must be hard wired
UL/CUL listed
115V-12AMP general purpose receptacle
(wired
separately)
Stainless steel, laminate or paint
Mirrored doors
Extra row of mezzanine shelf
Digital Thermometer
Front bumper 1" or 3"
Ice pans
Sandwich rack
Door Locks
Important Note: All refrigerated cases are
designed to operate in an environment of
75 degrees and 55% relative humidity.
Important Note: Product must be cooled
before being displayed within the case.
