User Manual
Q
2
RollerManual Rev. G
www.HoverMatt.com |
5
4482 Innovation Way
Allentown, PA 18109
800.471.2776
Fax 610.694.9601
www.HoverMatt.com
Returns and Repairs
All products being returned to HoverTech International (HTI) must have a
Return Goods Authorization (RGA) number issued by the company. Please
call 800-471-2776 and ask for a member of the RGA Team, who will issue
you an RGA number. Any product returned without an RGA number will
cause a delay in the repair time.
Returned products should be sent to:
HoverTech International
4482 Innovation Way
Allentown, PA 18109
Attn: RGA #______________________
Phone: 800-471-2776
Fax: 610-694-9601
Cleaning & Maintenance
CLEANING
The Q
2
Roller is a single-patient use device. If the device becomes soiled, completely wipe it down using a germicidal cleaner (phe-
nolic disinfectant, quaternary solution or other intermediate level disinfectant according to facility procedure) to disinfect. For best
results, follow the cleaner manufacturer’s recommended dwell time and instructions for use. Apply germicidal cleaner directly into
hard-to-reach areas. Let air dry. Do not launder.
INFECTION CONTROL
The HoverCover Half Size is recommended to cover the Q
2
Roller to keep the device from getting soiled (also available for separate
purchase). Other materials, such as pads or linens, may also be placed on top of the Q
2
Roller to keep it clean.
If the Q
2
Roller is used on an isolation patient, the hospital should employ the same protocols/procedures it utilizes for the bed mat-
tress and/or for the linen in that patient room.
AIR SUPPLY CLEANING AND MAINTENANCE
See air supply manual for reference.
NOTE: CHECK YOUR LOCAL/STATE/FEDERAL/INTERNATIONAL GUIDELINES BEFORE DISPOSAL.
PREVENTIVE MAINTENANCE
Prior to use, a visual inspection should be performed on the Q
2
Roller to ensure that there is no visible damage that would render the
Q
2
Roller unusable.
The Q
2
Roller should be periodically inspected to ensure the following:
• All inflation valves are self-sealing with no evidence of leakage
• There are no punctures or tears in the Q
2
Roller
If any damage is found that would cause the Q
2
Roller not to function as intended, the Q
2
Roller should be discarded.
