While the Renegade is powered on, press the power button once to
activate high speed mode. An ‘S’ icon will be diplayed when the
Renegade is in high speed mode. In low speed mode, the max speed
of the Renegade is 10 mph (16km/h). In high speed mode, the max
speed is 18mph (29km/h).
To activate crusie control, quickly press the throttle down two times
while riding at a constant speed above 3 mph. You will hear a beep
and the cruise control indicator will light up on the LCD display,
indicating that it is activated. Press the throttle down once or squeeze
the brake handle to cancel cruise
control.
While the Renegade is powered on, press the red dual drive button located
on the left handlebar to activate dual drive mode. The dual drive icon (2) will
appear on the display. This mode engages the both 450w motors for
increased power and acceleration, however the top speed will not change.
This mode can help the Renegade climb slightly steeper inclines. Press the
button again to turn dual drive mode off.
For safety reasons, the Renegade will not accelerate unless it is already
moving at least 1.8 mph (3 km/h). You must first kick off the ground and then
press the throttle in order to ride the E-Scooter.
KICK TO START
DUAL DRIVE MODE (2-WHEEL DRIVE)
HIGH SPEED MODE
CRUISE CONTROL
22
