• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V-240V; 50 Hz/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the
Renegade (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to red,
indicating that your device is now being charged.
• When the red indicator light on your charger changes to green, then your
device is fully charged.
• After fully charging your Renegade, unplug the charger from your device
and from the power outlet.
Only use the included charging
cable and charger to charge your
Renegade. Using any other charger
may damage your Renegade.
CAUTION
CHARGING YOUR RENEGADE
PREPARING YOUR E-SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS AND BRAKE HANDLE
1. Attach the right handlebar by placing it into the right-side socket and
twisting it counter-clockwise.
2. Attach the brake handle to the left handlebar.
3. Attach the left handlebar by placing it into the left-side socket and
twisting it counter-clockwise.
4. Tighten the screw in the brake handle with the included hex key.
COUNTER-CLOCKWISE
18
