Houston M741LMRT, Руководство пользователя

Страница: 28 / 46

Expansion Slots
This mainboard has one PCI 32-bit expansion slot and one 8/16-bit
ISA slot. The slots are shared. This means that you can only use
one of the slots at one time.
Follow the steps below to install a PCI or ISA expansion card.
1. Locate the PCI or ISA slot on the mainboard.
2. Remove the blanking plate from the appropriate expansion slot
on the system chassis.
3. Install the edge connector of the expansion card into the slot
and press it quite firmly down so that it is seated correctly.
4. Secure the bracket of the expansion card into the expansion
slot in the system chassis using the screw that held the
blanking plate in place.
LAN Wake Up
In ATX power system you can configure your system so that it
powers down by software and can be resumed by alarms.
If you have installed a LAN adapter expansion card, connect the
card to the LAN Wake Up header J12. This allows incoming traffic
to resume the system from a software power down.
ISA Slot
PCI Slot
J12-LAN Wake
Up Header
1