Houston M741LMRT, Руководство пользователя

Страница: 22 / 46

Install the Extension Brackets
The extension brackets are used to transmit features on the
mainboard to external connectors that can be fixed to the system
chassis. Follow the steps below to install the extension brackets.
Note: All the ribbon cables used on the extension brackets carry a
red stripe on the pin-1 side of the cable.
LAN Adapter Extension Bracket
This bracket supports an RJ45 network connector and connects to
the built in J11 LAN header on the mainboard.
1. On the mainboard, locate the J11 LAN header for this bracket.
2. Plug the cable from the bracket into the J11 LAN header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Fax/Modem Module
The Fax/Modem DAA module plugs directly into the mainboard
adjacent to an expansion slot in the system chassis. When you
remove the blanking plate from the system chassis, you can access
J11-LAN Header
LAN Extension
Bracket
1