Mk4 Pairing Instructions
March 2016
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913 ● Fax: +353 56 7725936
Page 8 of 8
You can now start using HouseMate to record and transmit InfraRed codes. Refer to the
manual for further details.
Go to Project->About HouseMate->User Manual.
Rebooting for use with an Android device.
To reboot your hardware for use with an Android device you need to be connected to an iOS device.
1.
Make sure that you are connected and choose
Project->Setup your devices-
>HouseMate hardware->Hardware Settings->Factory Reset
2.
Enter the word “factory”
3.
You will be asked to unpair the HouseMate Switch before the reboot can take place. This is
because the HID must be reconfigured as a bluetooth mouse – HouseMate HID Mouse.
4.
The unit will emit a long beep and the red and orange lights will illuminate. HouseMate is
now ready for use with an Android device.
Using HouseMate with more than one device.
HouseMate will auto-reconnect to up to 3 Android devices or 3 iOS devices. It will connect to the
device it finds first. Turn off the devices that you do not wish to connect to.
It is not possible to use HouseMate with an Android and an iOS device without carrying out the
reboot procedure described earlier.
Distributed by Technical Solutions Australia
tecsol.com.au
