21
GB
S
N
DK
EST
FIN
D
TESTING THE SMOKE ALARM DEVICE
1. Always test all devices after installation to ensure that they are functioning
properly.
2. The test button performs a full test of all functions. Never use an open flame to
test the smoke alarm, it can destroy the smoke alarm device.
3. Test your smoke alarm device routinely once a week.
4. Always test your smoke alarm device after a long period of absence from home.
5. Always stand at arm’s length when testing your smoke alarm device to avoid
damage to your hearing.
FOR YOUR SAFETY!
NEVER IGNORE A SMOKE ALARM DEVICE THAT HAS GONE
OFF. WHEN YOU HEAR THE ALARM SIGNAL, YOU MUST GIVE IT YOUR FULL
ATTENTION AND ACT ACCORDINGLY.
TROUBLESHOOTING
PROBLEM
ACTION
The smoke alarm device gives off no signal
when tested.
Check that the battery still have some charge
and mounting plate is connected correctly.
LED (red) flashes about every 344 seconds,
beeps about every 43 seconds.
This indicates low battery charge.
The smoke alarm device goes off when there
is no smoke.
1. Clean the smoke alarm device. See also
section on “CAUSES AND REMEDIES FOR
FALSE ALARMS”.
2. Change the location of the smoke alarm
device.
The buzzer buzzes 3 times every 43 seconds.
End of life indication. Replace the alarm
immediately.
Содержание SA703
Страница 1: ...SMOKE ALARM PEBBLE LINK USER MANUAL SA703 Ver 220617...
Страница 2: ...Consumer contact GPBM Nordic AB Argongatan 2 B SE 431 53 M lndal Sweden info housegard com...
Страница 151: ......
Страница 152: ...Consumer contact GPBM Nordic AB Argongatan 2 B SE 431 53 M lndal Sweden Contact info housegard com...