Houghton BELAIRE A3400, Руководство пользователя

Страница: 8 / 29

5
Note
Angle of inclination of the air-conditioner shall not be greater than 5
°
and the rear of the air-conditioner shall
not be higher than the front
.
For advice on installations outside of these limits please contact HOUGHTON or the local distributor
.
Before the installation
,
consider the installation position
:
● The air-conditioner shall be installed in the center of
the roof to deliver even air flow within the caravan
.
● The installation position of the outdoor unit shall be
consistent with the traveling direction of the caravan
.
●
When installing ensure that there is sufficient room for
the plenum assembly to be installed
.
●
Consider the installation position and ensure that
outlets are at least 400mm
(
16"
)
away from cupboards
,
walls
&
bulkheads that can redirect conditioned air
back to the return air intake
.
If an outlet is closer than
400mm from an obstruction
,
then it should be sealed
closed
.
Failure to do this will result in a unit that
frequently cycles on and off
.
●
360 × 360mm
/
14
3
/
16
× 14
3
/
16
" cutting position shall
avoid roof cladding joints where ever possible
.
●
There shall be a space of 100mm
/
4
"
minimum all
around the roof top unit to ensure suitable air flow and
access for maintenance
.
● The figure below shows the minimum clearance distance required between the BELAIRE air-conditioner and any
obstructions on the roof and the clearance required on the ceiling for the plenum installation
.
Measure from the
reference position of the 360 × 360mm
/
14
3
/
16
× 14
3
/
16
"
square hole
.
Remember to add 100mm
/
4
"
clearance
around roof top unit perimeter
.
Direction of travel
Plenum position
Position of rooftop unit
Square hole
(
360× 360mm
)
Installation position
Front
Traveling direction of the caravan
Back
360
354
174
575
1122
850 515
360
Unit: mm