Houghton BELAIRE A3400, Руководство пользователя

Страница: 19 / 29

16
LED lighting function
●
Press the
"
LIGHT
"
key
,
the plenum LED lighting will turn on
.
● When LED lighting is on
,
press the
"
DIM
"
key to select 25
% /
50
% /
75
% /
100
%
brightness
.
The plenum LED
lighting will display different levels of brightness
.
●
Press the
"
LIGHT
"
key again
，
the plenum LED lighting will turn off
.
WIFI function ( valid only for units with WIFI function)
●
Turn on the remote control
,
enter into WIFI connection mode by pressing the
" ℃ / ℉ "
and
"
LOCK
"
keys simultaneously
for 6s. The indicator light on plenum will show
"
SC
"
and rapidly blink
.
Connect WIFI with mobile
,
open the APP
,
add
device
,
click
"
confirm
"
. Please refer to WIFI operation instruction for detailed instructions
.
Timing function
●
Set clock and timer
.
1
Press the
"
SET TIME
"
key
,
the Hour digit will flash
.
Press
" ▲ "
or
" ▼ "
key to set hour
.
Press the
"
HOUR
/
MIN
"
key
,
the Minute digit will flash
.
Press
"
▲
"
or
"
▼
"
key to set minute
.
Clock setup is done
.
2
Press the
"
SET TIME
"
key
,
until
"
ON
"
shows on the upper right side of the clock and hour digit flashes
.
Then press
the
"
HOUR
/
MIN
"
key
,
and
"
▲
"
or
"
▼
"
key
,
to set the desired time to turn the unit on.
3
Press the SET TIME
"
key
,
until
"
OFF
"
shows on the lower right side of the clock and hour digit flashes
.
Then press
the
"
HOUR
/
MIN
"
key
,
and
" ▲ "
or
" ▼ "
key
,
to set the desired time to turn the unit off.
4
Clock and timer is now set
.
Keep on pressing the SET TIME
"
key to check again clock and programmed time to turn
unit on and off
.
When all setup is done
,
after 10 flashes
,
it will return to clock display
.
●
Timing to turn on
:
Press the
"
TIMER
"
key until
"
ON
"
flashes and shows the time to turn on
.
When
"
ON
"
is displayed
after its 10 flashes
,
and only current clock is displayed
,
then the setup of timing to turn the unit on is done
.
●
Timing to turn off
:
Press the
"
TIMER
"
key until
"
OFF
"
flashes and shows the time to turn off
.
When
"
OFF
"
is displayed
after its 10 flashes
,
and only current clock is displayed
,
then the setup of timing to turn the unit off is done
.
●
Timing to turn on and off
:
Press the
"
TIMER
"
key until
"
ON
"
and
"
OFF
"
flashes simultaneously and shows the time to
turn off
.
When
"
On
"
and
"
OFF
"
are displayed after their simultaneous 10 flashes
,
and only current clock is displayed
,
then
the setup of timing to turn the unit on and off is done
.
●
Turn off timing function
:
Press the
"
TIMER
"
key
,
when it only shows the clock
,
the timer function is turned off
.
● Simple method to reset the timer function
:
remove battery from the remote control
,
and then replace , The remote
control will be restored to the factory settings
,
and the timer function is turned off
.
"
"
When only DC power supply, the will "--". Only LED lighting work when the air-conditioner is in
DC mode
;
When the DC voltage of the battery is less than 10.8 V, the LED lighting is fixed at 25% brightness and can not be
adjusted.When the DC voltage of the battery returns to 11.4 V or more,the LED lighting can be adjusted
normally.
plenum display show
brightness
●
●