Hottek HT-959-200, Руководство пользователя, Страница: 12 / 24

ENG
12
5. Non-stick Cooking Plates
6. Handle
Before the first use
• Remove all the packing materials from appliance.
• Unwind the power cord in full.
• Pull the handle (6) up and open the appliance.
• Wipe a non-stick coating of plates with a damp cloth or sponge and then
wipe dry.
• Apply the small amount of vegetable oil on a non-stick coating of the working
surfaces and distribute it evenly. Remove excess oil from the working
surface with a paper towel.
• Close the appliance and plug it into electric outlet for 5-10 minutes, after
what it is ready for use.
Attention!
Do not eat waffles cooked for the first time!
Using the appliance
• Before using the appliance, wipe the heating surfaces (5) of appliance with
a damp cloth or sponge.
• Place the appliance on a flat horizontal fire-resistant surface. Unwind the
cord in full. Plug in a pin plug into female socket with a voltage of 220-240V
~ 50/60Hz equipped with a protective earth.
• Inset the pin plug into the power outlet, you will notice that the power (2)
and the ready light (3) will go on, indicating that the appliance has begun
preheating. Allow your appliance to pre-heat until the ready light (3) goes
out. This indicates that the cooking plates have reached the correct
temperature for cooking.
• Open the appliance pull the handle (6) and raise the lid (1) up until it stops
in open position.
• Pour on the bottom heating surface as much dough, so she was completely
filled, the dough should not leak out the edges.
• For uniform done waffle, you need to quickly fill the bottom heating surface
dough.
Here is one prepare the dough for the biscuit waffles.
Ingredients:
Eggs – 5 PCs.
Hot water – 5 tablespoons