97-6574 • HOTSY 900-1400 GAS FIRED • REV. 10/05
OPERA
T
OR’S MANU
AL
PRESSURE W
ASHER
14
OPERATION INSTRUCTIONS
To Clean
WARNING: Risk of injection or severe injury - Keep
clear of nozzle - DO NOT direct discharge stream at
persons - This machine is to be used only by quali-
fied operators.
AVERTISSEMENT: RISQUE D’INJECTION ET DE
BLESSURES GRAVES. SE TENIR À L’ÉCART DU JET.
NE PAS DIRIGER LE JET DE SORTIE VERS D’AUTRES
PERSONNES. CONFIER L’UTILISATION DE CE
MATÉRIEL À UN OPÉRATEUR QUALIFIÉ.
1.
Insert detergent inlet line into container of mixed
detergent. Open detergent ON/OFF valve. The
detergent will be pulled automatically into the sys-
tem. Allow detergent to reach end of wand before
proceeding to step 3.
2.
Select pressure nozzle with spray pattern that
matches your cleaning needs. Engage manual trig-
ger lock and install selected nozzle.
3.
Wash from the bottom to the top, using side to side
motions. This washes away heavy dirt and allows the
detergent to soak as you work toward the top.
4.
Do not wash at a 90°
angle to the work (straight at it).
This will allow water to splash back at you and
reduces your cleaning power. Wash at a 30° to 60°
angle to the work. This will allow the water to splash
away from you and the water will wash the dirt away
faster and easier.
5.
Use the width of the spray pattern to wash in a wide
path. Overlap spray paths for complete coverage.
Wash from side to side, using slow, steady motions.
6.
The nozzle should be 12" to 24" from work, closer
for tough areas. Be careful on painted or delicate
surfaces, the pressure may damage surface if nozzle
is too close.
7.
Small parts should be washed in a basket and larger,
lightweight parts should be clamped down so the
pressure does not push them away.
8.
Close the detergent ON/OFF valve to permit rinse.
Always rinse with cold water after using detergents.
Rinse from the top to the bottom to prevent deter-
gent from dripping onto a rinsed area. For the best
results, contact your Hotsy dealer to help you select
the best detergent for your application.