FILTER CARTRIDGE REMOVAL AND CLEANING
1. Disconnect the spa from the power supply by turning the power to the spa OFF.
2. Remove any floating items from within the filter compartment.
3. Turn the filter retainer handle (located on the top of the filter cartridge)
counterclockwise until the retainer can be removed from the filter standpipe.
4. Remove the filter retainer, cover and cartridge (cover only used on
TEMPO
,
RELAY
&
RHYTHM
spa models).
SERVICE NOTE:
Never remove the filter standpipe when debris is present in the
filter compartment. Debris may find its way into the internal plumbing which may
result in blockage. NEVER REMOVE SUCTION FITTINGS!
5. Always clean the filter using a filter degreaser, such as
HOT SPRING
FRESHWATER
Filter Cleaner, to remove mineral and oil build-up. Simply soak the
filter in the degreaser according to the package directions, then place the filter on
a clean surface and spray until clean using a garden hose. It may be necessary
to rotate the filter while spraying to remove any debris lodged between the filter
pleats.
6. To reinstall the filter cartridge, reverse the order of steps in which it was removed.
Do not overtighten.
CARE OF THE SPA PILLOWS
The spa pillows will provide years of comfort if treated with care. They have been positioned above the water level to minimize the bleaching
effects of chlorinated water and other spa water chemicals. To extend their life, whenever the spa shell is being cleaned, the spa pillows should be
removed and cleaned. Body oils can be removed with a mild soap and water solution. ALWAYS rinse off the spa pillows thoroughly to remove any
soap residue. If the spa is not going to be used for a long period of time (that is during a vacation or if the spa is winterized), or when the spa
water is being super-chlorinated, the spa pillows should be removed until the next use of the spa.
To remove and replace the spa pillows:
1. Carefully lift one end of the pillow away from the spa shell.
2. Continue lifting one end until all pillow retainers are released from the pillow.
IMPORTANT
: Just pulling the pillow straight up and out of the shell recess will eventually damage the pillow. This abuse is not covered under
warranty.
3. To reinstall the spa pillow, carefully bend the pillow slightly to allow one of the pillow retainers to slip into the recess in the back of the pillow.
4. Keeping the pillow slightly bent, slide the other pillow retainer into the recess in the back of the pillow.
5. After all the pillow retainers are in place, press the pillow down into the recess in the spa shell.
CARE OF THE SPA SHELL
Your
HOT SPOT
spa has an acrylic shell. Stains and dirt generally will not adhere to your spa’s surface. A soft rag should easily remove most
dirt. Most household chemicals are harmful to your spa’s shell (see below for detailed information on cleaning agents). Always rinse off any spa
shell cleaning agent with fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents for your
HOT SPOT
spa shell: plain water, FRESHWATER Spa Shine,
Brillianize
®
or Soft Scrub
®
. The use of alcohol or any other household cleaner other than those listed to clean the spa shell surface is NOT
recommended. DO NOT use any cleaning products containing abrasives or solvents since they may damage the shell surface, specifically:
Simple Green
®
, Windex
®
or Spa Mitt. NEVER USE HARSH CHEMICALS! Damage to the shell by use of harsh chemicals is not covered
under the warranty. Always rinse off any spa shell cleaning agent with fresh water.
2. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your HOT SPOT dealer about a Stain and Scale Inhibitor
to use if your spa has a high concentration of dissolved minerals. (Watkins recommends FRESHWATER Stain & Scale Defense.)
3. Keep all cleaners out of the reach of children and use care when applying.
CARE OF THE SPA COVER
WARNING:
The cover is a manual safety cover that meets or exceeds all prevailing requirements of ASTM Standards for spa safety covers
when installed and used correctly as of the date of manufacture. Non-secured or improperly secured covers are a hazard. Open the cover to
its fully open position before use.
The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and conditioning are recommended to maintain its beauty.
Page 42
Maintenance and Spa Care
FILTER
CARTRIDGE
STANDPIPE
RETAINER
HANDLE
FRESHWATER
Ag+
SILVER ION
PURIFIER INSIDE
STANDPIPE
FILTER
COVER
