HotSpring FLR Скачать руководство пользователя страница 23

Страница: 23 / 44

System Display Active

SYSTEM MODE

Your Limelight

™

hot tub is equipped with a System Mode. This function will allow you to conveniently turn the

jet(s) on high speed and the light on maximum intensity at the same time.
To activate the system mode, perform the following functions:
Press the MODE

▲

button until the SYSTM symbol is illuminated on the display. The jets and light icons will flash

until the system mode is activated. Press the ON

▲

button to activate the SYSTM mode feature.

NOTE:

Once activated, the jet and light functions can still be changed by pressing the JETS or LIGHT button.

To deactivate the system mode, press the MODE

▲

button until the SYSTM symbol is illuminated on the display. Press the OFF

▼

button to

deactivate.

TOOLS MENU

The TOOLS menu is one of the main menus on the control panel. Within the TOOLS menu are six submenus,

which consists of; Clean, Temp Lock, Spa Lock, Summer Timer and Exit.
To enter into the TOOLS menu, scroll through the main menus using the MODE

▲

or MODE

▼

button until the

TOOLS menu is illustrated. Press the ON

▲

button to enter into the TOOLS submenu, use the MODE

▲

MODE

▼

button to scroll through the submenus. Once the desired submenu is illustrated, press the ON

▲

button

to activate the submenu or press the OFF

▼

button to deactivate the submenu. To leave the TOOLS submenu, scroll through the submenu until

EXIT is illustrated, press the ON

▲

button to exit the submenu.

CLEANING MODE

All Limelight hot tubs are equipped with a “Cleaning” mode. When the mode is activated, the jet pump in the first

jet system will turn on and run for ten minutes (used for water maintenance). To activate the “Cleaning" mode,

press the MODE

▲

or MODE

▼

button until the TOOLS menu is illustrated. Then press the ON

▲

button to

enter the TOOLS submenus. The CLEAN symbol will illuminated (the CLEAN mode is the first submenu) on the

display. Press the ON

▲

button to activate the CLEAN mode feature.

NOTE:

The jet icon will remain solid in the CLEAN display and will flash on and off in the main display while the “Cleaning ” mode is active.

To stop the Cleaning Cycle before the ten minutes is complete, Press the MODE

▲

button until the TOOLS menu is illuminated then press the ON

button to enter the TOOLS submenus where the CLEAN symbol is illuminated on the display. Press the OFF

▼

button to deactivate.

NOTE:

Pressing the JETS button will also deactivate the clean cycle.

LOCKING FEATURES

The two locking features, SPA LOCK and TEMPERATURE LOCK, are enabled from the control panel by pressing the MODE

▲

or MODE

▼

button until the TOOLS menu is illustrated. Then press the ON

▲

button to enter the TOOLS submenus. Use the MODE

▲

or MODE

▼

button to

scroll through the submenus to get to the locking features. Once enabled, a lock will remain active until the specific button combination is applied
to disable the lock. Even if power is disconnected from the hot tub and soon thereafter reapplied (such as in a power outage) the lock will remain in place.

TEMPERATURE LOCK

The TEMPERATURE LOCK feature deactivates the temperature control function of the control panel. The jets and the

light functions will operate normally. TEMPERATURE LOCK is most often used by people who do not want others to

tamper with or change the set temperature of the hot tub water. TEMPERATURE LOCK is a submenu of the TOOLS menu
To activate the TEMPERATURE LOCK, press the MODE

▲

button in the TOOLS submenu until the LOCK + symbol

is illuminated on the display. The lock icon will flash on and off when deactivated. Press the ON

▲

button to activate

the TEMPERATURE LOCK feature.
When the TEMPERATURE LOCK is activated, the JETS, LIGHT and any other features your hot tub may have will

operate normally, and the temperature setting can be viewed but can NOT be changed. If a temperature button is

pressed, the control panel will display the lock symbol and the set temperature for 30 seconds, then turn off.
To deactivate the TEMPERATURE LOCK, press the MODE

▲

button in the TOOLS submenu until the LOCK -

symbol is illuminated on the display. Press the OFF

▼

button to deactivate the TEMPERATURE LOCK feature.

SPA LOCK

The SPA LOCK feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted

use of the spa. The SPA LOCK menu is a submenu of the TOOLS menu.
To activate the SPA LOCK, press the MODE

▲

button in the TOOLS submenu until the SPA + symbol is illuminated

on the display. The lock icon will flash on and off when deactivated. Press the ON

▲