Hotronix Sport Ball Heat Press Manual / 2016-09-28a / pg 1 of 4
Sports Ball
Heat Press
Model STXBP-120
Operator’s Manual
Safety Precautions
When using your heat press, basic precautions should always be followed, including the following:
1.
Read all instructions.
2.
Use heat press only for its intended use.
3.
To reduce the risk of electric shock, do not immerse the heat press in water or other liquids.
4.
Never pull cord to disconnect from outlet, instead grasp plug and pull to disconnect.
5.
Do not allow cord to touch hot surfaces, allow heat press to cool completely before storing.
6.
Do not operate heat press with a damaged cord or if the equipment has been dropped or damaged. To reduce
the risk of electric shock, do not disassemble or attempt to repair the heat press. Take it to a qualified service
person for examination and repair. Incorrect assembly or repair could increase the risk of fire, electric shock, or
injury to persons when the equipment is used.
7.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
8.
Close supervision is necessary for any heat press being used by or near children. Do not leave equipment
unattended while connected.
9.
Burns can occur when touching hot metal parts.
10.
To reduce the likelihood of circuit overload, do not operate other high voltage equipment on the same circuit.
11.
If an extension cord is necessary, then a 10 amperage rated cord should be used. Cords rated for less amperage
may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.
Product Warranty Registration
Log onto www.hotronix.com/registration
You must provide the Sports Ball Heat Press
serial number and model information.
Contact Us
Hotronix, Inc.
www.hotronix.com
1-(800)-727-8520
24/7/365
1 Paisley Ind Park Carmichaels, PA 15320
