Hotronic Micro Dry, Руководство по эксплуатации

Страница: 11 / 90

11
1. General information
1.1 Safety instructions / Electrical safety
1.1.1 Basic safety principles
This device is built in line with the state-of-the-art and accepted safety
regulations. However, dangers for the user or third parties as well as
damage to the device and other objects can occur if it:

is used by untrained or unauthorized personnel

is put to unintended use,

is not properly maintained or serviced.
1.1.2 General safety instructions

The device may only be used indoors!

The device must only be used with original
WINTERSTEIGER spare parts/consumables.
Any use of third-party materials is at the operator's own
risk and sole responsibility; note that this will void your
warranty.

Use of attachments not recommended or sold by
WINTERSTEIGER may result in a risk or fire, electrical
shock, or injury to persons.

Never block the ventilation openings at the sides of the
device. Do not put flammable products directly on or
next to the Micro Dry.

Do not cut-off or restrict air circulation/ventilation.

Never drop or insert any object into any opening of
device.

Use device only for purpose intended and described in
this manual.

Close supervision is necessary when this device is
used by or near children.

Do not immerse cord or plug and this product in water.

Do not operate in standing water.

Do not expose the Micro Dry to rain, snow or other
extreme humid conditions causing condensation.

If device is dropped into water, do not try to retrieve until
first unplugging cord from electrical outlet. Reaching
into water to retrieve device while plugged into electrical
outlet may result in death!

Never touch the heated zones of the device.

Some electrical parts are electrically live even with
Micro Dry shut off!

The Micro Dry contains electronic components! Always
use the supplied power cable, or a suitable equivalent
cable. Observe the Technical information (see the
Technical description page 13) of this document.

Check the compatibility of the device with the existing
power supply (110-230V). Use correct power plugs!