background image

INSTRUCTIONS on INSTALLATION & USE for WMA5

Hotpoint recommends, for your own safety and to ensure you get the best possible results from your

Washing Machine, you read through this booklet and follow these steps thoroughly.

Choose a location for your washing

machine where possible on a solid floor,

with the electrical sockets and water

supply taps easily accessible.

Allow sufficient space: 600mm width,

600m depth and 900mm height.

DO NOT install in a bath or shower

room.

Dispose of packaging material in a safe

place and remove any labels.

Please read through thoroughly to

ensure you understand each stage

before you begin.

Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.

Keep this Book in a safe place for quick reference.

STEP 1

STEP 2

A wash chart is provided to help you to

select your required programme.

Examples given for the maximum 

washing load weight for different fabric

types.

STEP 4

WARNING: This appliance must be earthed.

Remember you may be charged for a service call if a

problem with your washing machine is caused by 

incorrect installation or misuse.

Electrical Guide

Installation Guide

Programme Selector Dial

Read through this section to familiarise

yourself with the different 

compartments within the dispenser

drawer.

STEP 3

Dispenser Drawer

NOTE: Always follow manufacturer’s dosage 

recommendations.

All available optional wash features are

explained within this section -  These

allow you to adjust your selected wash

programme to suit your needs.

STEP 6

Options Guide

How to start your selected programme

and how to stop or change the

programme if so required.

STEP 5

Using your Machine

NOTE: Progress indicator lights show what stage in

the programme cycle has been reached.

Hotpoint recommend the Persil range of 

detergent products.

STEP 8

Troubleshooting

A picture guide provides a clear 

explanation how to set a wash 

programme.

DO NOT overload the washing machine.

STEP 7

A Typical Wash Programme

NOTE: Hotpoint recommend, on completion of

your programme, that you switch off both the 

electricity and water supply to the appliance.

Please refer to the Troubleshooting 

section if you have any problems when

using your washing machine.

There may be nothing wrong!

NOTE: In addition to the temperature of the 

incoming water, the selection of optional wash 

features will affect the programme times.

READ BEFORE

CONTACTING

SERVICE!

Содержание WMA5












Отзывы: