How tome the
Bleach Dispenser
How tome the
Fabric Softener
Dispenser
How to Use the
Soak setting
Use this dispenser with liquid
bleach only. If you prefer to use
powdered bleach, pour it into the
wash basket along with your
detergent. Do not put powdered
bleach into the bleach dispenser.
●
Measure bleach carefully. Here
are some recommended amounts:
FULL WATER LEVEL—1%
(310 ml) liquid
LOW WATER LEVEL–2/3
(170 ml) liquid
system–1/4 cup
(60 ml) liquid
●
Pour measured amount of liquid
bleach
into bleach dispenser.
●
Do not overfill or
dispenser
to overflow. Avoid splashing.
Undiluted bleach can cause fabric
damage.
●
Never pour undiluted liquid
bleach directly onto clothes or
into the wash basket.
●
Position the Fabric Softener
Dispenser on the agitator.
Pour manufacturer’s recommended
amount of fabric softener into a
standard measuring cup.
. Add enough water to fill the cup
1/2 full.
●
Pour the diluted softener into the
dispenser.
●
fabric softener will
automatically be dispensed at the
proper time.
●
Do not stop the washer during
the first spin. This will cause the
dispenser to empty too soon.
When using Fabric Softener
Dispenser with the
system, use one (1) teaspoon (5 ml)
of concentrated
or one (1)
tablespoon (15 ml) of diluted
softener.
Do not use the Fabric Softener
Dispenser with the Soak Setting.
ND, MA,
SOIL
/
.
setting temperature
will automatically be cold.
●
If a hot or warm soak is desired,
set the
TEMPERATURE switch to
“HOT/COLD” or “W*/COLD”
and turn the Cycle
Knob to
“Heavy
Start the washer. After
washer
and begins to agitate,
push in the Cycle Selector
and
turn to
out the Cycle
Selector
to complete the cycle.
—
For
soak
the
washer to and agitate for a few
minutes to dissolve the soaking
agent. Then push in the Cycle
Selector Knob to stop the washer
(keep
and allow to
for as long as desired. After desired
soak period, pull out the Cycle
Selector Knob to complete the cycle.
8
