Wash & Auto Dry Programme
Select required wash
programme (see STEP
4) by turning the wash
dial clockwise.
Sort laundry by label
into groups with the
same wash & dry
requirements, load
the appliance.
See Drying Weight
Load examples
(STEP 6).
2
Close door by
applying pressure at
the 2 o’clock position.
3
Select optional wash
feature (see STEP 5) by
pressing button.
4
Turn the drying dial to
select a suitable drying
time and temperature
for fabric type (see
chart, STEP 6).
6
Switch on both the
water and electricity
supply at the mains.
Press ‘ON’, the door
will lock and after a
few seconds the
indicator light will
illuminate and stay lit
throughout the wash
& dry programme.
1-2 minutes after
completion of the
wash programme the
door locked indicator
light will go out and
the door can be
opened. Switch ‘OFF’
after use.
7
Add detergent and/or
fabric conditioner to
the dispenser drawer
(see STEP 3).
1
8
9
5
WARNINGS:
●
Do not allow children
to play with the
appliance or tamper
with the controls.
●
Do not overload the
appliance! It may
damage laundry and
reduce the quality of
the wash.
●
Do not attempt to open the
door when water is visible in
the drum or if the door locked
indicator light is lit.
●
Do not use a dosing ball
to dispense detergent
when using a wash and
auto dry programme.
Drying Dial:
Rotate the dial in any direction
to the required heat setting /
drying time. During operation
the dial will slowly rotate
clockwise to the next OFF
position at which point the
drying cycle will end, after a
few seconds the door locked
indicator light will go out and
the door can be opened.
Low Heat Setting
Fabric Type
High Heat Setting
Numbers
represent
drying time
End of
Programme
Start of
Programme
Pointer
STEP 7
