12
GB
Troubleshooting
Problem:
The tumble dryer won’t start.
Drying cycle will not begin.
Its taking a long time to dry.
Possible causes / Solution:
●
The plug is not plugged into the socket, or not making contact.
●
There has been a power failure.
●
The fuse has blown. Try to plug another appliance into the socket.
●
You are using an extension cord? Try to plug the dryer’s power cord
directly into the socket.
●
The PROGRAMMES knob has not been set properly (
see Start and
Programmes
).
●
The START button has not been pressed (
see Start and Programmes
).
●
The START button was pressed with the door open. Make sure the door is
closed before pressing the START button (
see Start and Programmes
).
!
If the START button is pressed with the door open the dryer will not
start. Close the door, wait for a few seconds and then press the START
button again (
see Start and Programmes
).
●
You have set a delayed time (
see Start and Programmes
).
●
The filter has not been cleaned (
see Maintenance
).
●
The temperature setting is not ideal for the type of fabric you are drying
(
see Start and Programmes
).
●
Auto Programmes require a HIGH temperature setting (
see Start and
Programmes
).
●
The correct programme has not been selected for the load (
see Start
and Programmes
).
●
The flexible vent tube is obstructed (
see Installation
).
●
The air intake vent is obstructed (
see Installation
).
●
The permanent ventilation flap on the storm cover is obstructed (
see
Installation
).
●
The items were too wet (
see Laundry
).
●
The dryer was overloaded (
see Laundry
).
One day your dryer seems not to be working. Before you call your Service Centre (
see Service
), go through the
following troubleshooting suggestions:
