![Hotpoint RK962G Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/hotpoint/rk962g/rk962g_use-and-care-manual_2167282033.webp)
Use This Problem Solver
Microwave Oven
I
PROBLEM
CONTROL PANEL
ON, YET OVEN WILL
OPERATE
FOODS
OVERCOOKED
OR UNDERCOOKED
MICROWAVE OVEN
FAN COMES ON
WHEN OVEN IS OFF
“PROBE” APPEARS
ON DISPLAY
“ERROR” APPEARS
ON DISPLAY
POSSIBLE CAUSE AND REMEDY
START pad not touched.
●
Door not securely closed.
●
Another function was touched. Touch CLEAR/OFF pad to cancel.
●
Numbers not entered after touching TIME COOK pad.
. Finished temperature not entered
entering Auto Roast code 7.
●
CLEAR/OFF pad touched accidentally.
. No code number entered after touching
ROAST or
DEFROST pad.
●
Not
enough time set when using Time Cook function because starting temperatures
of foods varied widely.
●
Varying density and amount of foods will sometimes require more cooking time.
●
Probe not inserted properly into meat or dish. Check cookbook or Auto Roast section
of this book.
. Incorrect power level entered.
●
Dish not rotated, turned or stirred as called for in recipe.
●
Too many
dishes in oven at same time.
●
Food not thoroughly defrosted.
●
Improper use of coverings. Check cookbook and this book for instructions.
●
Microwave Oven fan is used during self-cleaning of Conventional Oven to keep
components cool. Microwave power is not on.
. Probe not inserted properly into oven receptacle or food.
●
Probe not used, although
ROAST pad has been touched.
When using Auto Roast code 7 to
Cook/Hold, you have entered a temperature
of less than
or more than
1
Conventional Oven
PROBLEM
POSSIBLE CAUSE AND REMEDY
OVEN WILL
OPERATE
●
Difficulty may be in the main distribution panel of your house by a blown oven
circuit fuse, a tripped oven circuit breaker, the main fuse or the main circuit breaker,
depending on the nature of the power supply. If a circuit breaker is involved, reset it. If
the control box uses fuses, the oven fuse (a cartridge-type) should be changed BUT
ONLY BY SOMEONE FAMILIAR WITH
CIRCUITS. If, after doing
one of these procedures, the fuse blows or circuit breaker trips again, call for service.
NOTE: Apartment tenants or condominium owners should request their building
management perform this check before calling for service.
●
Oven controls not properly set.
●
Door left in locked position after cleaning.
OVEN LIGHT
●
Light bulb is loose or burned out.
DOES
WORK
●
Button operating oven light is defective.
●
Clock not set. Touch CLOCK pad and enter time.
TOUCH PADS
WILL NOT WORK
(continued next page)
33