Oven Control, Clock and Timer
The clock must be set for the
automatic oven timing functions
to work properly. The time of day
cannot be changed during a Time
Bake or Clean cycle.
To Set the Clock
Step 1. Touch the CLOCK pad.
Step 2. Press INCREASE or
-DECREASE pad to set the time
c
day.
Power Outage?
After a power outage, when power
is restored the display will flash
and time shown will no longer be
correct.
The display flashes until the clock
is reset. All other functions that
were in operation when the power
went out will have to be
programmed again.
The timer does not control oven
operations. The maximum setting
on the timer is 9 hours and 55
minutes.
To Set The Timer
Step 1. Touch the TIMER pad.
Step 2. Press INCREASE or
DECREASE pad to set the amount
of time on the timer.
The timer will start automatically
within a few seconds of releasing
the pad.
The timer, as you are setting it,
will display seconds until 60
seconds is reached.
Then it will display minutes and
seconds until 60 minutes is
reached.
After 60 minutes, it will display
hours
now appears in
display) and minutes until the
maximum time of 9 hours and 55
minutes is reached.
To Reset Timer
Touch TIMER pad and then press
INCREASE or DECREASE pad
until the time you want shows on
the display.
To Cancel Timer
Press & hold TIMER pad until the
word “TIMER” quits flashing on
the display (about 4 seconds).
Timer Tones
The timer tone is 3 beeps followed
by 1 beep every 6 seconds. If you
would like to remove the one beep
every 6 seconds, press & hold
for 10 seconds.
To return the tone of beep every
6 seconds, press& hold
for seconds.
Display Messages
If “door” appears on the display,
LOCK flashes and oven signals,
you set the self-clean cycle and
not shut the oven door.
If “F” and a number flash on
display, this indicates function
error code. Touch
pad. If function error code does
not clear, disconnect power to
the range
call
service.
