Hotpoint HSFX.1, Информация о сервисе

Страница: 18 / 25

18 of 25
Service Manual UK
Whirlpool UK Appliances Ltd
English
Replacing the Lamps
Disconnect the hood from the electricity supply.
Warning: - Prior to touching the light bulbs, ensure that they are cooled
down.
Replace the old light bulb with one of the same type as the original.
Extend the drawer completely.
Remove the grille.
Replace the faulty lamp. Use
‡
35 mm E14 28W Halogen candle lamp
only.
Refit the grille.
MALFUNCTIONS
If something appears not to be working properly, do the following simple checks before calling
Technical Service:
If the hood is not working check that:
- The power has not been disconnected.
- A speed has been selected.
If the hood performs inefficiently check that:
- The motor speed selected is sufficient for the amount of smoke and vapours released.
- The kitchen is sufficiently ventilated to allow air intake.
- The charcoal filter is not worn (hood in filtering version).
If the hood has turned off during normal functioning check that:
- The power has not been disconnected.
- The omnipolar disconnection device has not tripped.
If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost
5 seconds by pulling out the plug. Then plug it in again and try once more.