Hotpoint HE7L 492, Инструкция по эксплуатации

Страница: 10 / 16

10
GB
Wash cycles
Table of wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
spe-
ed
(rpm)
Detergents
Max. load
(kg)
Residual
dampness%
Energy con- sumption kWh
Total water lt
Cycle dura-
tion
W
ash
Fabric
softener
Essentials
1 Anti Stain 40° 1400
 
4 - - - 180’
2 Whites 60° 1400   4 - - - 180’
Cotton Standard 60°C
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1400
 
7 53 1.10 52.5 190’
Cotton Standard 40°C
(2):
lightly soiled resistant and delicate colours.
40° 1400   7 53 1.09 92 185’
5 Synthetics: heavily soiled resistant colours. 60° 800
 
3.5 44 0.93 47 115’
5
Synthetics (3):
lightly soiled resistant colours. 40° 800
 
3.5 44 0.57 46 100’
Specials
6 Anti Allergy
60° 1400
 
4 - - - 195’
7 Baby 40° 1000
 
4 - - - 145’
8
Wool:
for wool, cashmere, etc. 40° 800
 
1.5 - - - 70’
9 Delicates 30° 0
 
1 - - - 80’
10
Fast Wash 60’:
to refresh normal soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
60° 1400   3.5 53 0.81 40 60’
Eco Cycle
11
Cotton Standard 20°: lightly soiled resistant and delicate colours.
20° 1400
 
7 - - - 170’
12
Cottons
Cold
Water
1400
 
7 53 0.17 63 80’
13 Synthetics
Cold
Water
800   3 48 0.07 30 70’
14
Fast Wash
Cold
Water
800
 
3 71 0.04 34 30’
Partials cycles
A
Rinse
- 1400 -

7 - - - 36’
B Spin+Pump out - 1400 - - 7 - - - 16’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.