background image

How to operate your dishwasher

Door Latch

Cycle Indicator Dial

 

 DRYING 

 

 

 

 

 

 

 

 k.,

J

STEP 1. Load your dishwasher
with dishes, silverware, pots, pans,
bowls, etc. according to instructions

on pages 8 and 9.

STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)

Use rinse aid agent to help prevent
spotting. (See page 6.)

STEP 3. Select DRYING HEAT
Option. It must be ON for PLATE
WARMER cycle, OFF for RINSE
HOLD cycle. It can be ON or OFF,
at your option (see below), for any

of the wash cycles.

I

 HEAT

ON

OFF

ON. Turns the drying heater on for
fast drying.

OFF. Turns the drying heater off
to save energy. Dishes will dry
naturally over a longer period such
as overnight.

If you need your dishes sooner,

open the dishwasher door after the
cycle is complete to reduce the
natural drying time.

Use of this option reduces the

electrical energy used by this model
approximately 8% for the NORMAL
WASH cycle.

STEP 4. Select WATER 
BOOST Option.

WATER 

 BOOST

ON

OFF

ON: The wash cycle may be
extended while the dishwasher
automatically heats the water for
good washing and drying. The
entering water must be at least

OFF: The entering water must be
at least 

STEP 5. Select the cycle and start
the dishwasher.

If your dishwasher drains into a
food waste disposer, operate the

disposer until it is empty before

starting the dishwasher. (See Cycle
Selection Hints at right.)

To obtain the benefits of a complete
cycle, be careful that you  do not
turn the dial any further than
necessary  
to start the dishwasher.

● 

For POTS & PANS, NORMAL

 and LIGHT WASH cycles:

POTS 

 

 WASH

WASH

a. Push selected cycle button.

b. Latch the door.

ON 

OFF 

■ 

. RINSE

HOLD

 

 w, ,”.,

WARMER

 

 

 

 ,

c. Slowly turn Cycle Indicator Dial

to ON position to start the cycle.
There is a time delay between
start-up and water fill so you will
not hear any wash action right

away.

● 

For RINSE HOLD cycle:

a. Be sure door is unlatched.

b. Select DRYING HEAT-OFF

drying option.

ON 

m

OFF 

c. Slowly turn Cycle Indicator

Dial to RINSE HOLD position.

d. Latch the door to start the cycle.

4

Содержание HDA950G





















Отзывы: