Hotpoint HCM10, Инструкция по эксплуатации

Страница: 14 / 20

12 12
12 12 12
AMC15
Preheating cups and pipes
Espresso coffee should always be prepared with the pipes already heated and served in a hot cup that enhances the
aroma and prolongs the flavour. Thermal shock can alter the aroma of coffee.
The lower the quantity of espresso coffee in the cup, the more important it is to heat the cup.
• Place the cup under the boiling water distributor.
• Half-fill the cup.
• Leave the water in the cup for 30 seconds and then empty it. This will preheat the pipes as well.
Preparing coffee
• Position the cup or cups underneath the spouts.
• Check that the has stopped flashing. (= boiler temperature reached).
• Press the button to start the supply. The supply stops automatically but it can be stopped early by pressing the same
button again.
Hot water
• Use the key to switch the boiler on and prepare hot water.
• Wait for the symbol to stop flashing and remain illuminated.
• Place the cup or container under the distributor.
• Turn knob
"A " (Fig. 7) to the left to obtain hot water.
Steam
• Switch on the heating system to obtain steam by pressing the
button
• Wait for the symbol to stop flashing and remain illuminated.
• Before placing the cup or container under the distributor, turn
the knob "A " (fig.7) to the left in order to let the remaining water
in the pipes coming out.
• Turn knob "A" (Fig. 7) to the left to obtain steam.
PREP PREP PREP PREP PREPARA ARA ARA ARA ARATION OF TION OF TION OF TION OF TION OF THE DRINKS THE DRINKS THE DRINKS THE DRINKS THE DRINKS
Fig. 7 Fig. 7
Fig. 7 Fig. 7
Fig. 7
A