Hotpoint FZA34, Инструкции по установке и использованию

Страница: 4 / 20

Installation
Levelling:
Level the freezer when it is in its final location by adjusting the front feet, until firm
contact is made with the floor. This will stop rocking or vibration and keep the door
aligned which helps the freezer run reliably and efficiently.
Note: Before plugging in and switching on, leave the freezer standing in its
final location for at least 15 minutes to allow it to settle.
Fitting a Freezer under a Work Top
To minimise running costs Hotpoint recommend fitting a vent to the rear of your
worktop, which is available from Hotpoint Genuine Parts & Accessories Mail Order
Hotline (see KEY CONTACTS, back page).
WARNING: If there is less than 30mm (1
1
/
4
inches) clearance above the freezer, a
Vent must be fitted to provide adequate ventilation above your freezer.
4
SAFET
Y &
INST
ALL
A
TION