GB
7
When
the i-care
function is active, only slight
adjustments can be made to the temperature settings.
The freezer can be adjusted only colder, from -18°C to
-19°C or -20°C.
The refrigerator can be adjusted slightly colder or
warmer from a g5°C to 4° or +6°C.
If it is necessary to make these adjustments,
hold down
the i-care button and use the
and
temperature
adjustment buttons for either the freezer or refrigerator
compartment.
The i-care setting can be de-activated by pressing the
corresponding button (see Control Panel).
(Note also that i-care will automatically be de-activated
if certain other buttons are pressed, see below).
Then, it is possible to make larger adjustments to the
compartment temperatures using any of the available
settings on the display for the refrigerator and freezer.
The set temperatures may not be achieved in all
conditions, but try adjusting the setting warmer
or colder (as necessary). The actual stored
food temperature can be affected by food loading,
number of door openings and by extreme ambient
conditions (very cold or very warm locations).
To activate and de-activate other functions simply press
the relevant button and the status will be shown by
the corresponding LED switching on or off.
The
Holiday function
minimises energy usage when on
holiday the set temperatures may not be adjusted.
The settings will automatically be +12°C for the
refrigerator and -18°C for the freezer.
AUTO and Holiday button will be illuminated.
Remember to remove perishable food.
To avoid setting conflicting operating modes, some
functions cannot be selected together.
Example: Super cool, super freeze, ice party, i-care
cannot be selected with Holiday mode.
The LEDs indicate the active function.
Press the
Ice Party
button when a wine bottle is
inserted in the freezer for chilling.
A buzzer will beep once and the Ice party LED light will
flash indicating the bottle
must
be removed.
Do
not
leave the bottle in the freezer because it will
freeze and this can cause the bottle to break.
Press the Ice Party button to cancel the LED .
ALARMS.
!
The freezer status bar is also used to indicate an
unusual temperature increase in the freezer
compartment. See
Troubleshooting
section for more
details about alarms and cancelling these.
No Frost cooling system
This is recognisable by air
ducts located on the back
walls of each
compartment.
The No Frost system
circulates cold air
continuously to collect
humidity and prevent ice
and frost formation. The
system maintains an
optimal humidity level in the compartment, preserving
the original quality of the food, preventing the food from
sticking together and making defrosting a thing of the
past. Do not block the air circulation by placing food or
containers in direct contact with the rear ducts.
Child Lock
In order to activate the Child Lock function, the Child Lock
button must be pressed for 2 seconds; the activation of the
button lock is confirmed by a short beep and the
illumination of the corresponding LED.
To deactivate the function, press the Child Lock button for 2
seconds; deactivation will be confirmed by a short beep
and by the corresponding LED switching off.
