3
EN
!
The dishwasher meets the requirements set out by
the regulations in force concerning safety and
electrical equipment.
!
Any technical checks should be conducted
exclusively by a trained and authorised technician:
Repairs carried out by unaithorised persons will
invalidate the guarantee, as well as posing a potential
hazard to the user.
!
The manufacturer declines all responsibility for
damage to persons or property resulting from failure to
observe the above precautions, from tampering with
even a single component or from the use of non-
original spare parts.
Electrical Connection
Before inserting the plug into the electrical socket,
make sure that:
•
the socket is earthed and complies with current
regulations;
•
the socket can withstand the maximum load of the
appliance, which is indicated on the data plate
located on the inside of the door (
see Description
of the appliance);
•
the power supply voltage falls within the values
indicated on the data plate on the inside of the
door;
•
the socket is compatible with the plug of the
appliance. If this is not the case, ask an authorised
technician to replace the plug (
see Assistance); do
not use extension cables or multiple sockets.
!
Once the appliance has been installed, the power
supply cable and the electrical socket should be
easily accessible.
!
The cable should not be bent or compressed.
!
The cable should be checked regularly and replaced
by authorised technicians only (
see Assistance).
This appliance must be earthed.
Fuses:your appliance comes fitted with a plug and a
13A fuse. If you need to replace the fuse, only those
rated at 13A and ASTA approved to BS1362 should be
used. If you lose the fuse cover, a replacement may
be obtained from your local authorised Service Centre
or Electrical company. Correct replacement is
identified by colour coding or the marking on base of
plug.
!
DO NOT use the plug unless the fuse cover is fitted.
Changing the Plug
Cut off and dispose of the supplied plug if it does not
fit your socket.
!
To avoid a shock hazard DO NOT insert the
discarded plug into a socket anywhere else.
!
Wires in the mains lead are coloured accordance
with the following code:
Green/Yellow -
Earth
Blue
-
Neutral
Brown
-
Live
If you change the plug, the colour of the wires in the
mains lead may not correspond with the terminal
markings in the plug, which if not coloured, could be:
EARTH
‘E’ or
NEUTRAL
‘N’
LIVE
‘L’
Changing the Mains Lead
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
- If you have damaged the existing lead or require a
longer one a charge will be made. It is strongly
advised that this work is carried out by a qualified
electrician.
- If the domestic wiring includes a residual current-
operated circuit breaker, ensure that it conforms to the
latest regulations.
!
The dishwasher must not be connected to the
electricity supply while installation is being carried out.
- This appliance should only be connected to a 230/
240V AC source, via a properly installed earthed
socket.
- Use the dishwasher solely in a domestic
environment.
- DO NOT stand or place heavy objects on the door
when it is open, this could damage the door or cause
the appliance to tip forward.
Содержание FDW 70
Страница 19: ...19 EN Notes ...
