background image

GB

11

*

 Only available in selected models.

Detergent and 

dishwasher use

Measuring out the detergent

Good washing results also depend on the correct amount of 
detergent being used. Exceeding the stated amount does not 
result in a more effective wash and increases environmental 
pollution.
The amount can be adjusted to the soil level.
In the case of normally soiled items, use approximately either 
35g (powder detergent) or 35ml (liquid detergent). If tablets 
are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed 
with water before being placed in the dishwasher, reduce the 
amount of detergent used accordingly. 
For good washing results also follow the instructions shown 
on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.  
Place the amount of detergent for pre-washing directly 
inside the tub.

1.

 When measuring out the detergent refer to the Table of wash 

cycles to add the proper quantity. Compartment 

B

 comprises a 

level showing the maximum quantity of liquid or powder detergent 

that can be added to each cycle.

2.

 Remove detergent residues from the edges of the dispenser 

and close the cover until it clicks.

3.

 Close the lid of the detergent dispenser by pulling it up until 

the closing device is secured in place.
The detergent dispenser automatically opens up at the right time     
according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS 
option, because it adjusts the cycle so that the best washing and 
drying results are always achieved.

Only use detergent which has been specifically designed 

for dishwashers.

DO NOT USE washing up liquid.
Using excessive detergent may result in foam residues 
remaining in the machine after the cycle has ended. 
To achieve the best washing and drying results, the combined 
use of detergent, rinse aid liquid and refined salt is required.

We recommend using detergents that do not contain 
phosphates or chlorine, as these products are harmful 
to the environment.

Starting the dishwasher

1. Turn the water tap on. 
2. Open the door and press the ON/OFF button. 
3. Measure out the detergent. 

(see adjacent information).

4. Load the racks (

see Loading the racks

).

5. Select the wash cycle in accordance with the type of crockery 
and its soil level 

(see Table of wash cycles)

 by pressing the 

P

 

button.
6. Select the wash options

*

(see  Special  wash  cycles  and 

Options)

.

7. Start the wash cycle by shutting the door.
8. The end of the wash cycle is indicated by beeps and by the 
flashing of the indicator light of the selected wash cycle. Open 
the door, switch off the appliance by pressing the ON/OFF 
button, shut off the water tap and unplug the appliance from the 
electricity socket.
9. Wait a few minutes before removing the crockery in order to 

avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during 

long periods of inactivity in order to minimise electricity 
consumption.

If the crockery is only lightly soiled or if it has been rinsed 

with water before being placed in the dishwasher, reduce the 
amount of detergent used accordingly. 

Changing a wash cycle in progress

If a mistake was made in the wash cycle selection process, it 
is possible to change the cycle provided that it has only just 
begun: open the door, taking care to avoid the escaping steam, 
and press and hold the ON/OFF button; the machine will switch 
off. Switch the machine back on using the ON/OFF button and 
select the new wash cycle and any options desired; start the 
cycle by closing the door. 

Adding extra crockery

Without switching off the machine, open the door, taking care 
to avoid the escaping steam, and place the crockery inside the 
dishwasher. Close the door: the cycle starts from the point at 
which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle or there is a power 
cut, the cycle stops. It starts again from the point at which it 
was interrupted once the door has been shut or the electricity 
supply restored.

Содержание EXPERIENCE FDLET 31120

















Отзывы: