Regular inspection and maintenance of your
appliance helps to prevent problems from
occurring. This saves time and aggravation.
You should therefore carefully inspect the
inside of your dishwasher from time to time.
Overall condition of appliance.
-
Check that no grease or scale has
accumulated on the inside of the
dishwasher.
If you discover any deposits:
-
Clean the interior of the dishwasher
thoroughly with a detergent solution.
Dishwasher salt.
The LOW SALT indicator on the control panel
4 will illuminate when salt is required. You
can also check the salt container itself.
Rinse-aid.
The LOW RINSE-AID indicator on the control
panel 5 will illuminate when rinse-aid is
required. Also check the level indicator on the
container.
IMPORTANT: Filters.
The filters prevent large particles of food or
other objects from getting inside the
pump. This residue can occasionally block
the filters.
The filter system consists of a filter
cylinder, a flat fine filter and depending on
the Model, a microfilter (*).
-
Inspect the filters for obstructions
every time the dishwasher has been
used.
-
By unscrewing the filter cylinder, you
can remove the filter system. Remove
any food remnants and clean the
filters under running water.
Remove any particles of food and
rinse the filters under running water.
Reassembly:
-
Insert the filter system and screw
down with the filter cylinder.
Ensure that the filter is locked in place by
screwing down until the two arrows are
aligned (as above).
Care and Maintenance...
21
FP105-01 DWF35/34/33/30 12/02/2002 10:23 am Page 21
